7.040  , 70  , 0   , l   , 1000   , 8x   , 100    , 2.5

Freq     R     X     i/l   Power    Line   Length   Plot res

The first file line above sets the defaults to be used in ZIZL.
It must always be the first line in the ZIZL.DAT file.
When making changes, be sure to preserve exactly 7 commas.


The following file lines are used to set the parameters for the various
types of transmission lines.  Values may be changed as desired, and
additional file lines may be added.  Be sure to preserve exactly 6
commas in each file line.

Transmission line type code '00' is reserved.  '00' must be used to
mark the beginning of the actual data (as opposed to these comments).
All file lines from '00' to the end of the file are considered data.

Line type code ('00' is reserved)
|      Resistive part of line char Zo (reactive part is computed)
|      |       Velocity factor
|      |       |      Matched-line loss in dB ...
|      |       |      |      At this freq in MHz
|      |       |      |      |     Loss interpolation sigma
|      |       |      |      |     |      Description
|      |       |      |      |     |      |
v      v       v      v      v     v      v

00
8x   ,  52   , .75  , 0.89 , 10  , .528 , RG-8X Foam
8xc  ,  52   , .78  , 0.88 , 10  , .528 , RG-8X Foam (custom)
58   ,  53.5 , .66  , 1.4  , 10  , .578 , RG-58 Solid
58c  ,  53.5 , .647 , 1.15 , 10  , .578 , RG-58 Solid (custom)
59   ,  73   , .66  , 1.2  , 10  , .501 , RG-59 Solid
59f  ,  75   , .79  , 0.95 , 10  , .501 , RG-59 Foam
174  ,  50   , .66  , 3.9  , 10  , .450 , RG-174 Solid
213  ,  50   , .66  , 0.65 , 10  , .583 , RG-213 Solid
450  , 450   , .95  , 0.14 , 10  , .450 , 450 Window Ladder Line